Our Principal
mj college header

PROF BASHEER AHMED
   
Department Administration
   
Designation Principal
   
Qualification B.E(Mech), M.S(Robotics & Automation),
Ph.D (Flexible Manufacturing System)
   
Experience
10 YEARS INDUSTRIAL EXPERIENCE (BHEL UNITS).
 
25 YEARS RESEARCH EXPERIENCE (BHEL,R&D).
 
4 YEARS ACADEMIC EXPERIENCE.
   
Membership Fellowship of Institute of Engineering.
Life Member of Indian Society for Technical Education.
  Life Member of Computer Society of India
   
Date of Birth 14th June, 1947
   
Date of Joining 20th August, 2007.
   
Office Address Muffakham Jah College of Engineering & Technology,
Road No. 3, Banjara Hills, Hyderabad - 500 0155.
Phone: (040) 2335 2084, 2335 0523.
   
Residential Address Plot no. 55, BHEL Colony,
Vikaspuri, S.R. Nagar (P.O.),
Hyderabad–38 A.P. India.
Phone: (040) 23812455.
   
E-mail Address principal@mjcollege.ac.in
 
     
 
PROF BASHEER AHMED
Career in BHEL   Joined in Sept 1972. Worked as an Addl General Manager and In-Charge of Technology Development Laboratory, Advanced Material Handling Systems and Workshop of Corporate R & D, Hyderabad.
   
Experience in BHEL
  • Worked in the following areas in different capacities Engineering and Commercial Co-ordination of 60 & 110 MW sets. BHEL, Hyd,1972-74.
  • Project Engineering , Piping Lay-outs of 60 & 110MW sets. Consultants/Site Interaction etc.
  • Consultancy/PED, New Delhi ,1974-77.Production follow-up of  Nuclear FBTR components. ESNP, New Dehli,1977-78.
  • In-charge of Central Work Shop, Corp. R & D Hyd,1978-86.
  • Worked in Technology Development Laboratory as Manager working on TDL Projects 1986-90.
  • In-Charge of Technology Development Laboratory 1990-2001
  • Incharge of TDL, Workshop & Advanced Material Handling Systems from 2001 till date.
  • Worked as Project Manager for executing 90 Crores order from DRDO,COD, Kanpur for supply and commissioning of 13 nos Warehouses
 
 

NationalPROF BASHEER AHMED

  36 Publications at National Level
  1. Industrial Robot-design aspects presented at National workshop on Robotics Pune, organized by DST and CEI ,1987. Publication (INDIA).

  2. "Introduction of FMS and Case Studies” National work-shop on Advanced manufacturing technology, JNTU, Hyderabad,1988.

  3. Computer –aided CNC part programming technique for generation of 3D sculptured surfaces of turbine blades and fan blades Proceedings of 13th AIMTDR Conference, Jadavpur University, 1988.

  4. CNC retrofitting to a conventional center lathe for high productivity and low cost modernization.” Presented at 13th AIMDER conference, Jadavpur University.

  5. Robotic application in arc welding – an over view of practice and future, Symposium on Joining of Metals (SOJOM,Trichy).

  6. Automated Guided Vehicle – Industrialproduct Finder,1992.

  7. "Development of flexible Manufacturing System through Retrofit Concepts”, Proceedings of 15th AIMDER Conference, Coimbatore,1992.

  8. Unattended Operation of Cost intensive CNC Machine s to achieve higher productivity” presented at 15th AIMDER Conference, Coimbature, 1992.

  9. "Industrial Experience in installation of an AGV developed In – house”,presented at 15th AIMTDR  Conference , Coimbature, 1992.

  10. "PC based CNC part programming Techniques for generation of Turbine Blade profiles” presented at 15th AIMDTR Conference, Coimbatore, 1992.

  11. "Tool Management Systems for CNC Turning Centers",Presented at 15th AIMDTR Conference,Coimbatore,1992.

  12. "A Review of tool Monitoring Systems for Efficient and Safe Operation of Cutting Tools" National seminar on Role of Cutting Tools and their Lubricants in Modern industries, 1992 Bhopal.

  13. Viable Modalities for interaction between Academia, R&D Labs and Industry”,Indian science Congress, Goa,1993.

  14. Indigenous Development of Auto tool changer for CNC lathe,16th AIMTDR Conference,Bangalore,1994.

  15. Development of an Automated material Handling and Storage Systems”, 16th AIMTDR Conference,Bangalore, 1994.

  16. "Development of System for automation of CNC lathe for un attended operation” 9th National Convention of production Engineers (Theme: Integrated Manufacturing), Trichy , -1994.

  17. Automated Storage and retrieval systems” ,9th National Convention of production Engineers (Theme: Integrated Manufacturing ),Hyderabad, 1994.

  18. Flexible manufacturing Systems”,10th National Convection of Mechanical Engineers (Theme:Computers in Mechanical Engineering ), 1994.

  19. Computers in warehouses and material handling systems” 10th National Convention of Mechanical Engineers (Theme:Computers in Mechanical Engineering ), Hyderabad, 1994.
  20. Concepts in computers integrated manufacturing",10th National convection of Mechanical engineers (Theme: computers in Mechanical engineering ), Hyderabad, 1994.

  21. Indigenous development of automatic tool changer for CNC lathes”, Engineering Advances, February 1995.

  22. Computer based material storage and handling by using AGV and ASRS”, IEEE Conference ACE-95, New Delhi, 1996.

  23. Flexible Manufacturing Systems”,IEEE Conference ACE”-95, New Delhi, 1996.

  24. 17th AIMTDR Conference,January 1997,warangal.
    • CAD/CAM solutions for efficient machining of turbo machinery  components by Sturz milling method.
    • Hot machining process for higher Productivity in turning of machine metals
    • Development of multi – aisle automated storage and retrieval system.
    • Review of abrasive water jet cutting technology and suitable application  areas for Indian industry.

  25. Automated Guided Vehicles”,Engineering Advances,July1997.

  26. Automated Storage and Retrieval systems”,Engineering advances, July 1997.

  27. Multi-Aisle Automated Storage and Retrieval System (M-ASRS),Industrial Product Finder, January 1998.

  28. "5-axes CNC programming for 3-D impellers- important aspects and an optimization technique for minimizing undercuts” , BHEL journal, February 1998.

  29. Unattended Operation of CNC lathe Manufacturing  Technology &Management (MT&M), July 1998.30.

  30. 18th  AIMTDR Conference,IIT,Kharaghpur,1998.
    • Buy or build Flexible Manufacturing system - a case study.
    • In process measurement and inspection on CNC Turning Center  by using retrofitted Touch Trigger probes – A case Study.

  31. Automated Storage and Retrieval system for storing solid chemicals” Industry digest, Nov- Dec 1999.

  32. "ASRS applications in India",Material Handling & Logistics. May-June 2000

  33. 19h  AIMTDR Conference , IIT ,Chennai-2000
    • Simulation Modelling Analysis of proposed steam turbine blade shop layout for meeting manufacturing Targets.

  34. 20th AIMTDR Conference ,BIT,MESRA,RANCHI-2002
    • Modelling and Simulation Studiesof FMS Layouts for Optimum Layout Selection.

  35. 21st AIMTDR Conference,VIT, VELLORE-2004.
    • Developmennt of Manufacturing Technology for drilling cooling holesin GAS turbine Nozzel Segments
    • Unigraphic Solutionsfor Productive Gauge Free 5-Axis Machining of Turbomachinary Components-Francis Runner Bladeand 3D Impeller.

  36. 22nd AIMTDR Conference,IIT,ROORKI-2006  RFID Technologies
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

InternationalPROF BASHEER AHMED
  14 Publications at International Level
  1. 01. Development of Industrial Robot and Robotic Application Studies- The Necessary Knowledge Base for Industries in Developing countries” International Symposium on Intelligent Robotics (ISIR-93),  Bangalore.

  2. 02. "Complexities in Retrofitting for Conversion of stand alone CNC Machines into Machining centers and Integrating into PC Based Flexible Manufacturing System (FMS)” International Symposium on Intelligent Robotics (ISIR-93), Bangalore.

  3. 03. Conceptual Design of Integrated Manufacturing cell for Machining Turbine Blades”,International Symposium on Intelligent Robotics (ISIR-93), Bangalore.

  4. 04. Design and  development of flexible  manufacturing  system for identified  Components utilizing existing CNC machines –a case study” processing of international conference on advanced manufacturing technology, Johar Bahru ,Malaysia,1994.

  5. 05.Automation in shop floor material handling using AGV and ASRS”, proceedings of International conference on advanced manufacturing technology ,  Johor Bahru,Malaysia,1994.

  6. 06. "Hot machining process for improved metal removal rates in turning operations proceedings  of  international conference on Advanced Manufacturing Technology, Johor, Bahru, Malaysia, 1994.

  7. 07. Development of  an automated Storage and Retrieval Systems for use in Production Environment”, ICCIM, Singapore,1995.

  8. 08. ”5-Axes CNC programming for 3D Impellers – Important Aspects and  Optimization technique for minimizing Under cuts, ICCIM, Singapore, 1995.

  9. 09. 22nd International Conference on Industrial Electronics, Control, and Instrumentation.1996 IEEE IEECON , Taipei, Taiwan
    • Application of Bar Code Technology in Automated Storage and Retrieval Systems
    • CAD/CAM   solutions for efficient machining of Turbo Machinery Components.

  10. 10. 2nd International Conference on precision Engineering (2nd ICAMT),  1996,Singapore.
    • Experience in the development of a tool conditioning Monitoring Systems for CNC Machines.

  11. 11. 3rd International Conference on Robotics & its applications, 1997, Japan
    • Gantry Robot – development and its applications.
    • Robotics –Focus & selectivity.

  12. 12. Indian Unigraphics users meet, 2004, pune, India.
    • CAD/CAM solutions for efficient machining of Turbo Machinery Components.

  13. 13. International Unigraphics users meet, 2004, Anaheim, California, USA.
    • CAD/CAM solutions for efficient machining of Turbo Machinery Components
  14. Robotics, Control and manufacturing technology (ROCOM ’06),China.
    • Modeling and simulation studies of FMS layouts for optimum layout selection.
 
PROF BASHEER AHMED
  Achievements:
  1. CNC Technology Electro Discharge Machining(EDM) Computer Aided Machining(CAM) CNC and DRO retrofitting Flexible Manufacturing Systems (FMS) Advanced Material Handling Systems (AGV,ASRS).
  2. Robotics-Pick & Place Robots, Welding Robots Hot Machining Computer Integrated Manufacturing (CIM) Precision Engineering & Microfabrication.
  3. Responsible for development of the following new Projects in BHEL and their commercialization.
    • Automated Guided Vehicle(AGV)
    • Automated Storage & Retrieval Systems(ASRS)
    • Pick & Place Robots & Welding Robot
    • BHEL Hot-turn
   
 
 
 
 
 
 
 
 
Awards 
  1. BHEL Excellence Award in productivity for development of New product - Automated Storage and Retrieval System During the year 2000-2001.
  2. Best Paper award at 2nd UNIGRAPHICS users meet,September,1996 Madras.” CAD/CAM solutions for efficient  machining of Turbomachinary Components by Sturz  Milling Madhavulu, SVN  Anil Sunder , Basheer Ahmed.
  3. Received Best Paper Award at the 16th AIMTDR Conference,Bangalore,1994 for the paper "Development of ATC for CNC Lathe”(Shared with Dr. KCB Raju)
 
 
 
 
   
Patents

Applied and registered on

  • Automated Guided Vehicle(AGV)
  • Automated Storage &Retrieval Systems (ASRS)
  • Gantry Robot
 
 
 
Honorary Post

Research Council Member of CMERI, Durgapur.

Member of Board of Studies of Rajive Gandhi University of Knowledge Technologies

..... of ICET, ECET and EMCET committees
 
 
 

A. Proposed 3 years Vision Plan (2007-2010) which was approved by G.C of MJCET and Board of SUES. The Vision plan was successfully Implemented which results in the following.

  1. Started 3 New PG Programs
    1. M.E (Digital Systems)
    2. M.E (Structural Engineering)
    3. M.E (Computer Engineering)
    Proposed 4th PG Program in M.E (Power Electronics Systems)
  2. Promoted R&D and consultancy activities. Solar Street Lights (5 Nos) installed in MJCET.
  3. Developed infrastructure modernizations of labs, seminar halls and procurement of computers, lab equipment , 320 KVA generator and 1000 Lts. Water treatment Plant.
  4. Faculty development programs
    1. Started study leave for pursuing higher education. That is M.Tect, Ph.D
    2. Reimbursement of one professional body life membership fee.
    3. Cash incentive schemes for achieving Ph.D qualification.
  5. Industrial tip up signed with ECIL, CITD for faculty / Student exchange programs.
  6. Academic partnership with Wipro, Infosys for enhancing placement for students.
  7. Under student encouragement programs
    1. Fee waiver schema for top 100 EMCET rank students. Seeking admissions in MJCET
    2. Awards Best student, Regular students, Best Student project etc.
    3. Funding for student projects like BAJA Vehicle development , Robotics club activities etc.
  8. Improved brand image for MJCET at state and national level, as per the Outlook magazine survey for top professional colleges. MJCET stood 57th out of 75 top government / Private engineering colleges for 2011-2012.
  9. Achieved highest placements for students in MJCET for the year 2010-2011. Total 566 job offers received from Multi national companies like Infosys, Accenture, Wipro etc.

B. Proposed 3 years vision plan (2010-2013) which was approved by GC of MJCET and BOG of SUES is under implementation.

 
   

 

  M.J.C.E.T  
  • Picture 1
  • Picture 2
  • Picture 3
  • Picture 4
  • Picture 5
  • Picture 6
  • Picture 7
  • Picture 8
  • Picture 9
  • Picture 10
  • Picture 11
  • Picture 12
  • Picture 13
  • Picture 14
  • Picture 15
 
 
B.H.E.L
  • Award
  • Certificate
  • Excdellent-award
  • Factory
  • Function1
  • Function